【PRECAUTIONS】
*The primer is very easy to dry after opening, so please use it immediately after opening it. Use one piece for each shoe.
*If it's you first time using SOLE PLUS 2.0, I strongly recommend that you watch the how-to video on the KICKSWRAP YouTube channel.
.
.
【STEP ①】
Use a wet tissue containing alcohol to make the sole clean without any sand, dirt and so on.
.
【STEP ②】
Place the shoe on the peeling paper side of SOLE PLUS 2.0. Trace the shape of the sole with a pen and cut with scissors.
Place the shoe on the peeling paper side of SOLE PLUS 2.0. Trace the shape of the sole with a pen and cut with scissors.
.
.
【STEP ③】
Wipe the sole with the attached primer, especially the toe, and press on the "SOLE PLUS 2.0" with your finger.
Wipe the sole with the attached primer, especially the toe, and press on the "SOLE PLUS 2.0" with your finger.
.
*If "SOLE PLUS 2.0" is bigger than the sole, please cut the protruding parts along the edge of the sole with small scissors."
*SOLE PLUS 2.0 tend of come off from unique shapes such as the star-shaped protrusions on the toes of AIR JORDAN 1, so please wipe them carefully with a primer and press them on strongly during this step. (I recommend you to watch the KICKSWRAP YouTube channel.)
*If the film on the toe seems to come off easily, please apply hot air for 15 to 30 seconds using a hair dryer and press it with your fingers. You can also apply glue for shoes instead.
*SOLE PLUS 2.0 tend of come off from unique shapes such as the star-shaped protrusions on the toes of AIR JORDAN 1, so please wipe them carefully with a primer and press them on strongly during this step. (I recommend you to watch the KICKSWRAP YouTube channel.)
*If the film on the toe seems to come off easily, please apply hot air for 15 to 30 seconds using a hair dryer and press it with your fingers. You can also apply glue for shoes instead.
.
【STEP ④】
Wipe the back of the HEEL PLUS with the attached primer and attach the double-sided glue. Then press it on the heel where you have already attached the SOLE PLUS 2.0 using your fingers.
Wipe the back of the HEEL PLUS with the attached primer and attach the double-sided glue. Then press it on the heel where you have already attached the SOLE PLUS 2.0 using your fingers.
.
Leave it still for more than 24 hours after the attachment and it's complete.
.
.
【CAUTION AFTER THE ATTACHMENT】
·SOLE PLUS and HEEL PLUS are consumables. Depending on how you use it and how often you use it, holes, cracks, and tears may occur in the film.
·The film is very hot after applying the dryer heat, so please be careful. We recommend to use a padding cloth when you press it.
·Please refrain from running with your sneakers, standing on tiptoe, jumping, rubbing your toes, or wearing them on rainy or snowy days.
·Some ways of walking, such as walking on a ground foot, may lead to the products coming off, so please try to land on the ground from the center of your heels when you walk.
·SOLE PLUS and HEEL PLUS are consumables. Depending on how you use it and how often you use it, holes, cracks, and tears may occur in the film.
·The film is very hot after applying the dryer heat, so please be careful. We recommend to use a padding cloth when you press it.
·Please refrain from running with your sneakers, standing on tiptoe, jumping, rubbing your toes, or wearing them on rainy or snowy days.
·Some ways of walking, such as walking on a ground foot, may lead to the products coming off, so please try to land on the ground from the center of your heels when you walk.
.
.
【IF YOU WANT TO REMOVE THE PRODUCT】
*Please peel it off carefully and slowly from the heel so that the sole does not have any glue left.
*If glue remains on the sole of the shoe, cover the remaining glue with tissue, apply acetone remover or glue remover spray, and wipe with a towel when it dries. (If you can't remove it in one try, repeat the process several times.)
*Please peel it off carefully and slowly from the heel so that the sole does not have any glue left.
*If glue remains on the sole of the shoe, cover the remaining glue with tissue, apply acetone remover or glue remover spray, and wipe with a towel when it dries. (If you can't remove it in one try, repeat the process several times.)